<< | Plumbing Information | >>
Garbage Disposal Troubleshooting
- If your Disposal makes a loud whirring noise or stops, it has jammed. Turn it off and wait 5 minutes, then firmly press the reset button on the bottom of the motor housing. (Machines without buttons reset automatically).
- If the Disposal still doesn't work, see if it's designed to be unjammed from below. It may have a small crank or a socket for an Allen wrench to turn the flywheel. Or it may have a reversing switch
- To cure a clog, disassemble the trap and use a snake.
- Water dripping from the Disposal usually indicates one or more seals are worn and need to be replaced.
- Helpful Hint When professional help is required, take the Disposal to the repair service to avoid paying for a service call. To remove it, separate it from the drain elbow and loosen the mounting screws to release it from the support flange.
- For best service from your Disposal, run cold water during disposal and for a minute after.
- Never put glass, metal or rubber in the Disposal.
- Disposals vary, so consult your owner's manual or call a professional!